Hydraulic structures

HYDRAULIC STRUCTURES GEOCONDUCT

GEOCONDUCT - Leak detection with conductive geosynthetics

Use

The realization of a leak detection campaign by geo-electric method on single or double liner systems increases the safety of the containment structure with respect to environmental risks. This requires the installation of an electrically conductive layer between the two geomembranes (double liner system) or between the geomembrane and the subgrade (single liner system) if the subgrade is not conductive enough.

GEOCONDUCT® is a needle-punched nonwoven conductive geotextile composed of a conductive grid made of Stainless-Steel cables. Placed under the geomembrane, it allows leak detection by geo-electrical methods and protects the geomembrane against puncture.

The applicable leak detection methods compatible with the GEOCONDUCT® are Water puddle (ASTM D7002) and Arc test (ASTM D7953) for exposed geomembranes, and Dipole (ASTM D7007) for covered geomembranes.

Benefits

  • Geocomposite that provides 3 functions: mechanical protection, filtration and leak detection
  • Homogeneous diffusion of electric current under the geomembrane
  • Compatible with geo-electrical leak location surveys: exposed geomembranes (Water puddle, Arc test) and covered geomembranes (Dipole)
  • Easy installation with a single product to unroll

Features

Filtration Filtration
Leak detection Leak detection
Mechanical protection Mechanical protection

Characteristics

  • Needle-punched nonwoven conductive geotextile
  • Conductive 50 mm x 50 mm (2’’ x 2’’) grid made of Stainless-Steel cables
  • Standard roll size: 3.90 m x 200 m (12.8’ x 656’)